Plastering is a great way to provide
watertight seal to the pool. A properly installed plaster or otherwise known as
white cement lasts as long as twenty years. However, the plaster degrades
slowly over a period of time. When you see all the plaster eroding from the
pool, re-plastering becomes mandatory.poolplasteringsacramento.com offers excellent info on this. Pool plastering job is a big task.
However, with the right tool, materials and knowledge, you can do this
plastering job all by yourself. When you do the plaster job, it not only saves
big bucks but also gives satisfaction.
While doing the plaster job all by
yourself, first thing to do is empty the pool, especially if you are using the
electrically driven tools. You can use chisel to remove the hanging pieces of
plaster and sandblast the entire area with an electric sander. Once you finish removing
all the sanding dust from the entire pool, it is the time to apply the white
cement. Remember to mix the plaster in a large container according to the
manufacturer's recommendation.
Apply the white cement over the
repair patch using a trowel. You can plaster up to one inch at a time. Once you
finish the coating, wait for a day for the plaster to dry off. One should be
very careful while applying a thick coat over the top edge, as the plaster may
sag at this area. Once the plaster is dried up, you can apply the waterproof
sealant. You can fill the water as well as other accessories in the pool, once
the sealant gets dried up.
